DACK-800 FLAT
BASE ANGULAR GLASS HOLDER
STAINLESS STEEL STAIR RAILING GLASS CLAMPS
For Profile Posts & Flat Surface Mounting
What Is the DACK-800 Flat Base Angular Glass Holder?
The DACK-800 flat base angular glass holder is a
professional stainless steel glass fixing component developed to securely mount
glass panels on sloped staircase railing systems where profile posts
or flat mounting surfaces are used.
Set Content
1 Set = 4 pcs
- 2
pcs angled with pin
- 2
pcs angled without pin
- 4
pcs inner seal for Clamps
This model shares all technical and functional
characteristics with the pipe-mounted (radius base) version.
The only difference is its completely flat bottom base, which
allows direct installation on flat and angular structural elements.
It is specifically designed for use on:
- Square
or rectangular profile posts
- Flat
steel structures
- Flat
concrete or architectural mounting surfaces
without the need for adapters, spacer plates, or additional
base components.
Purpose of the Flat Base Design
The flat base design is intended for modern architectural
railing systems that use straight-edged and flat-surfaced structural
elements instead of round pipes.
Thanks to this design:
- Direct
mounting on profile posts is possible
- Installation
time is reduced
- Angle
and alignment errors are minimized
- A
clean and architectural appearance is achieved
This makes the DACK-800 flat base model ideal for both new
construction projects and renovation applications.
Open (Without Pin) vs Closed (With Support Pin) Versions
The DACK-800 flat base angular glass holder is available in two
structural variants, each serving a specific function in staircase glass
installations.
🔹 Closed Type (With
Support Pin)
- Used
at the lower sections of the glass panel
- Provides
additional bottom support for the glass
- Preferred
on the downward side of the staircase slope
- Enhances
mechanical safety and load distribution
🔹 Open Type (Without Pin)
- Used
at the middle and upper sections of the glass panel
- Keeps
the upper glass edge visually clean
- Preferred
on the upward side of the staircase slope
Using both types together ensures a balanced, secure, and
aesthetically correct installation.
Angular Functionality for Staircase Applications
Glass panels installed on staircases must follow the natural
slope of the stairs. Fixed-angle glass holders are insufficient for such
applications.
The DACK-800 series is designed with angle-adaptive
functionality, allowing:
- Glass
holders to adjust according to staircase slope
- Use
of opposite-angle components for upper and lower slope directions
- Stress-free
installation without forcing the glass
This system significantly reduces the risk of glass damage
and installation errors, especially in long or complex staircases.
Set Contents – 1 Set = 4 Pieces
The DACK-800 flat base model is sold as a complete
installation set.
Each set includes:
- 2
closed-type (with support pin) holders, opposite angled
- 2
open-type (without pin) holders, opposite angled
This configuration ensures:
- Correct
angular alignment for both upward and downward slopes
- No
need for additional parts
- Faster
and error-free installation
Material Quality & Surface Finishes
The product body is manufactured from AISI 304 stainless
steel, providing:
- Excellent
corrosion resistance
- Suitability
for indoor and outdoor use
- Long
service life
- Minimal
maintenance requirements
Available Surface Finishes
- Mirror
polished
- Satin
brushed
Both finishes offer durability and a high-quality
architectural appearance.
Technical Specifications & Glass Compatibility
- Glass
Thickness Compatibility: 8 mm / 10 mm
- Glass
Hole Spacing (Center to Center): 190 mm (19 cm)
- Mounting
Type: Flat base – suitable for profile posts and flat surfaces
This hole spacing ensures correct vertical alignment and
symmetrical placement of glass panels. Glass fabrication and drilling must be
carried out according to this dimension.
Typical Applications
- Staircase
glass railing systems
- Interior
glass balustrades
- Commercial
and office projects
- Villas
and duplex staircases
- Renovation
and modernization works
Professional Advantages
- Precise
adaptation to staircase slopes
- No
stress or pressure on glass panels
- Reduced
installation time
- Lower
risk of loosening or vibration over time
- Clean
and modern architectural finish
The DACK-800 flat base angular glass holder offers a professional,
safe, and long-lasting solution for staircase glass railing systems mounted
on profile posts or flat surfaces.
While maintaining the same technical superiority as the pipe-mounted version, this model is specifically optimized for flat-surface and profile-based structural systems, making it an essential component for modern architectural glass railings.
KEYWORDS : flat base glass holder angular glass clamp staircase
glass railing clamp stainless steel glass holder profile mounted glass clamp flat
surface glass holder AISI 304 glass clamp adjustable glass railing hardware stair
railing glass fixing system